| Author |
 Topic  |
|
modaddict
Starting Member
USA
5 Posts |
 Posted - 22 Aug 2008 : 15:55:02
|
It still baffles me as to why you have not come out with this?
Every Subaru aftermarket EM has this option, yet you lag behind.
Is there any hope? |
Crawford Performance cp35r and I-speed tuning! |
 |
|
|
ecutekthailand
Advanced Member
Thailand
252 Posts |
Posted - 24 Aug 2008 : 09:33:02
|
i am not sure if we are all fully aware of the amount of time is needed to even decode one identified parameter from the whole ECU program.
By chance i had the opportunity to take a look at one Subaru map with almost 1000+ parameters, all in hex form.
May be it is wise for Mervyn or Steve to shed some light on this matter so we all understand the difficulties of getting more parameters out of the ECU's maps.
Cheers
Sep |
|
|
|
Coolrex
Starting Member
2 Posts |
Posted - 01 Oct 2008 : 13:31:22
|
Any chance you guys are gonna step up to the plate? If the JDM Suby has LC then we should too.
I don't know if anyone knows but I have a very high profile WRX (world's fastest stock block/stock transmission WRX) and I want LC to better my times. I don't want to leave Ecutek and go for a Cobb or Hydra so that I can get flat foot shifting and LC.
So at least can we get a reply or some form of update please? |
|
|
|
Holeshot
New Member
Canada
11 Posts |
Posted - 07 Oct 2008 : 01:33:16
|
quote:
Originally posted by Coolrex
Any chance you guys are gonna step up to the plate? If the JDM Suby has LC then we should too.
I don't know if anyone knows but I have a very high profile WRX (world's fastest stock block/stock transmission WRX) and I want LC to better my times. I don't want to leave Ecutek and go for a Cobb or Hydra so that I can get flat foot shifting and LC.
So at least can we get a reply or some form of update please?
It would be nice, but I am not holding my breath. |
|
|
|
Holeshot
New Member
Canada
11 Posts |
Posted - 18 Nov 2009 : 05:44:54
|
Well I waited over 3years in anticipation of Launch Control and nothing I switch to a full AEM stand alone to get Launch Control and other functions that I required and now I am stuck with a EcuTek locked ecu.
Thank you for that.
Is there a resolve for removing the ecutek flash and reverting it back to stock programing? |
|
|
|
ecutekthailand
Advanced Member
Thailand
252 Posts |
Posted - 18 Nov 2009 : 08:21:03
|
Just reflash the ECU back to original file and you can do whatever you want with it. Besides, you are going with AEM. Why do you need the stock ECU?
Cheers
Sep |
|
|
|
StephenDone
Forum Admin
United Kingdom
1026 Posts |
Posted - 23 Nov 2009 : 10:09:05
|
Hi Guys,
I think you should check out the news section of the EcuTek web site - it is quite relevant to this thread.
Steve |
|
|
|
Xavier@EcuTeK
Administrator
United Kingdom
136 Posts |
Posted - 24 Nov 2009 : 08:31:43
|
Look for the below text in the news section:
http://www.ecutek.com/news/
"RACE ROMs advanced features like Map Switching, Progressive Launch Control, Per Gear Rev Limits, Per Gear Boost Control and Full Throttle Shifting..."
"The new EcuTek RACE ROM features will be available for all Subaru Drive-By-Wire models in the new year." |
|
|
|
wayno
Starting Member
Canada
5 Posts |
Posted - 03 Feb 2010 : 14:35:32
|
So is this an update we can put on our existing ECUTEK software once testing is done?
thx |
|
|
|
Mervyn@ECUTEK
Administrator
United Kingdom
256 Posts |
Posted - 03 Feb 2010 : 14:59:00
|
The new RaceROM features will support nearly all DBW models.
Any EcuTeK dealer will be able to add these new custom features to your existing tuned ROM or create you a new tuned ROM.
The EcuTeK dealer can then select which features you would like enabled in which mode (ROAD or RACE mode)
You can have all the features in ROAD mode and all the features in RACE mode or only LC in RACE etc...
Mervyn |
|
|
|
modaddict
Starting Member
USA
5 Posts |
Posted - 21 Apr 2010 : 04:06:38
|
Mervyn's quote says release in march.........it's april..........and alot of us have been hanging on for years......
quote:
Originally posted by Mervyn@ECUTEK
Support for nearly all DBW models will be added soon.
We are Beta testing with a few dealers at present.
We hope to release in March ,
Mervyn - EcuTeK
The article:
Kocar Time Attack race in Poland
EcuTek is very pleased to announce that Kocar have won all 4 rounds of the Polish Time Attack race with their Subaru STI 08 tuned using EcuTek. The Time Attack car has been used in the development and proving of the soon to be released EcuTek RACE ROM product.
By running the new and powerful EcuTek RACE ROM ECU setup, Kocar ensured they were competitive and dominating during all 4 events.
RACE ROMs advanced features like Map Switching, Progressive Launch Control, Per Gear Rev Limits, Per Gear Boost Control and Full Throttle Shifting ensured success over the competition, while running significantly less BHP than most other entrants.
The new EcuTek RACE ROM features will be available for all Subaru Drive-By-Wire models in the new year.
The 4th round of the first elimination of Time attack Poland took place on Sunday the 18th of October 2009 on a very wet Pozna track (4.083km). Despite cold and rainy weather, 28 participants took part, competing in everything from modified Mitsubishi EVOs, Subaru Imprezas and Nissan Skylines to highly tuned Toyotas and Porsches.
Kocar's relatively standard Subaru STI 08 recorded the best times despite have significantly less power and was able to win because of a great chassis set up and the powerful functionality that RACE ROM has enabled within the standard ECU.
Read all about it here:
Polish: http://www.timeattack.pl
English: http://www.timeattack.pl
|
Crawford Performance cp35r and I-speed tuning! |
Edited by - modaddict on 21 Apr 2010 04:45:51 |
|
|
|
Ben - EcuTeK
Administrator
Canada
795 Posts |
Posted - 21 Apr 2010 : 08:05:35
|
quote:
Originally posted by modaddict
Mervyn's quote says release in march.........it's april..........and alot of us have been hanging on for years......
quote:
Originally posted by Mervyn@ECUTEK
Support for nearly all DBW models will be added soon.
We are Beta testing with a few dealers at present.
We hope to release in March ,
Mervyn - EcuTeK
modadict,
You are right we hoped to release in March.
but since there was a fire to the building next to EcuTeK building we had to move office twice and this has slowed down our development team. we are eager to release as much as you are.
Sorry for the delay. |
Cheers !
Ben
EcuTeK International |
|
|
|
modaddict
Starting Member
USA
5 Posts |
Posted - 22 Apr 2010 : 03:09:52
|
quote:
Originally posted by Ben - EcuTeK
quote:
Originally posted by modaddict
Mervyn's quote says release in march.........it's april..........and alot of us have been hanging on for years......
quote:
Originally posted by Mervyn@ECUTEK
Support for nearly all DBW models will be added soon.
We are Beta testing with a few dealers at present.
We hope to release in March ,
Mervyn - EcuTeK
modadict,
You are right we hoped to release in March.
but since there was a fire to the building next to EcuTeK building we had to move office twice and this has slowed down our development team. we are eager to release as much as you are.
Sorry for the delay.
Ben, throw me a bone here............what's the estimated new release date?
Are you guys expecting this to be an "upgrade" as far as cost goes?
I have already purchased Easy Ecu.
Do you need any help for increased Beta testing?
I have already started a thread informing people that this software will soon be released:
http://forums.nasioc.com/forums/showthread.php?t=1974682
Thanks Ben,
Ryan
|
Crawford Performance cp35r and I-speed tuning! |
Edited by - modaddict on 22 Apr 2010 03:13:22 |
|
|
|
ecutekthailand
Advanced Member
Thailand
252 Posts |
Posted - 22 Apr 2010 : 09:51:29
|
Hi Ben;
Recently my posts are not reflected on the forum topics. Whats going on?
Cheers
Sep |
|
|
|
modaddict
Starting Member
USA
5 Posts |
Posted - 25 Apr 2010 : 00:07:03
|
| Come on Ben! Throw me a bone here! |
Crawford Performance cp35r and I-speed tuning! |
|
|
|
Topic |
|
launch control??
